Brake Disc (Rotor)
Dont get confused when you see diagram for jeep Cherokee.Its just for example, but actually the position and location is same in Lexus too.
So you can go through diagram for better understanding.
Removal & Installation
- Raise and support the vehicle.
- Remove wheel and tire assembly.
- Remove the caliper slide bolts .
- Remove caliper .
- Secure caliper assembly to nearby suspension part with wire. Do not allow brake hose to support caliper weight.
- Remove and discard the O-ring securing rotor to axle studs.
- Remove rotor off axle studs.
To install:
- Install rotor on axle studs.
- Install the caliper assembly.
- Install caliper slide bolts.
- Install wheel and tire assembly.
- Remove support and lower the vehicle.
- Pump brake pedal until caliper pistons and brake shoes are seated.
- Before servicing the vehicle, refer to the Precautions section.
- Remove brake caliper and brake pads.
- Put matchmarks on the front disc and the axle hub.
- Remove the front disc.
To install:
- Align the matchmarks, and install the front disc.
NOTEWhen replacing the disc with a new one, select the installation position where the front disc has the minimum runout. - Install the brake pads and brake caliper assembly.
----------
For more car related problem troubleshooting:---
This are the sections, you can go through and click the link to read its troubleshooting.
---------
The car will not start?
-----------------
Car will not crank?
-----------
Car has no spark?
-------------
How to troubleshoot car battery?
-----------------
How to test starter solenoid?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html
--------------------
How to test cars starter?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html
How to replace starter in car?
-----------
No comments:
Post a Comment