HowToRepairGuide.com: How to Disable Theft Security on Car?

Tuesday

How to Disable Theft Security on Car?

If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.

Its not easy procedure.On some car models its not possible to disable theft security without car dealer or profession auto repair tech.

THEFT SECURITY SYSTEM IS PART OF VECHICLE PCM.

WHEN VEHICLE IS IN THEFT SECURITY MODE,YOU HAVE FAULTY IGNITION KEY OR WRONG IGNITION KEY.

YOU HAVE FAULTY IMMOBILIZER READ COIL IN THE IGNITION SWITCH KEY LOCK CYLINDER.OR YOU HAVE FAULT IN IMMOBILIZER CONTROL MODULE OR ECM HAVE VECHICLE CODE .

TO CONFIRM WHAT CODE IS STORED IN ECM YOU NEED TO SCAN THE ECM.

YOU CANT DISABLE THEFT SECURITY WITHOUT DISABLING ECM .VECHICLE NOT GOING TO WORK AGAIN NEED TO GET IT FIX.THEFT SECURITY SYSTEM WAS FACTORY MADE WITH VECHICLE CANT BE DISABLE.

If the problem is that the transceiver is having trouble seeing the pellet in your key, sometimes you can solve this by putting the pellet into the PATS ring. Remove the clamshell from the steering column by taking the screws out of the bottom. Both the top and bottom shells should come off. Look at the near end of the key barrel. There should be a thin black plastic PATS ring around the end with a few tiny wires connected. The ring is held on by one or 2 small screws. Carefully remove the ring leaving it to hang by the wires. Next dig the square cap out of the end of your factory key to reveal the pellet. Slip the pellet out of the key and place it inside the PATS ring. Wrap the ring with some tape to hold the pellet inside. Now try to start the car. If it works, set the PATS ring in the vacant space of the clamshell and put the column back together--Be careful with those little wires not to pinch or damage them in any way. Then go to the hardware store and get a spare key made. You will not need a factory key as long as the PATS ring can see that pellet inside.

This details will help.

Thanks.

-------

For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.

---------