How to replace Power Steering Pump on 1999 Acura tl ?

If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.

The procedure is as follows :----

Loosen the power steering pump mounting nut (A) and bolt (B).
Turn the adjusting nut (C) to get the proper belt tension, then retighten the mounting nut and bolt.
Start the engine and turn the steering wheel from lock-to-lock several times, then stop the engine and recheck the tension of the belt.

If the belt goes around the mount then you have to remove the motor mount to get the belt off.

This details will help.

Thanks.

----------------

For more Car steering repairs and solution details,check the list below:-----

How to replace Power Rack and Pinion Steering Gear on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-power-rack-and-pinion.html

How to replace Power Steering Pump on Acura Car Models?

Also bleeding:

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-power-steering-pump-on.html

How to replace Steering Linkage on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-steering-linkage-on.html

How to replace Steering Wheel on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-steering-wheel-on-acura.html

How to Replace Power Steering Fluid

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-power-steering-fluid.html

How to Check for Loose Steering System

http://schematicsdiagram.blogspot.com/2011/07/how-to-check-for-loose-steering-system.html

-----------------