The exhaust manifold removal details.
The complete details to remove/ install exhaust manifold with helpful diagrams is as follows :---
3.7L Engines
4.7L Engine
Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
The complete details to remove/ install exhaust manifold with helpful diagrams is as follows :---
3.7L Engines
- Remove or disconnect the following:
Negative battery cableExhaust manifold heat shieldsExhaust Gas Recirculation (EGR) tubeExhaust Y-pipeExhaust manifolds
To install:
NOTE
If the exhaust manifold studs came out with the nuts when removing the exhaust manifolds, replace them with new studs.
- Install or connect the following:
Exhaust manifolds. Torque the fasteners to 20 ft. lbs. (27 Nm), starting with the center nuts and work out to the ends.Exhaust Y-pipeEGR tubeExhaust manifold heat shieldsNegative battery cable - Start the engine, check for leaks and repair if necessary.
- Drain the cooling system.
- Remove or disconnect the following:
BatteryPower distribution centerBattery trayWindshield washer fluid bottleAir cleaner assemblyAccessory drive beltA/C compressorA/C accumulator bracketHeater hosesExhaust manifold heat shieldsExhaust Y-pipeStarter motorExhaust manifolds
To install:
- Install or connect the following:
Exhaust manifolds, using new gaskets. Tighten the bolts to 18 ft. lbs. (25 Nm), starting with the inner bolts and work out to the ends.Starter motorExhaust Y-pipeExhaust manifold heat shieldsHeater hosesA/C accumulator bracketA/C compressorAccessory drive beltAir cleaner assemblyWindshield washer fluid bottleBattery trayPower distribution centerBattery - Fill the cooling system.
- Start the engine and check for leaks.
These details will help.
Thanks.
FOR MORE HELP GO TO: ---
No comments:
Post a Comment