How to Replace Oil Pan on Dodge RAM?

The Dodge RAM Truck Oil pan replacing procedure.

The complete details for oil pan removal..
The procedure here covers following Engine models :----

3.7L, 4.7L & 5.7L Engines.

The details are as follows:----

1. Drain the engine oil.
2. Attach an engine crane.
3. Loosen, but don-t remove, the left and right mount through-bolts.
4. Remove or disconnect the following:
   
   
   Negative battery cable

   Structural cover

   Front crossmember
5. Raise the engine just enough for clearance.
6. Remove or disconnect the following:
   
   NOTE

   Don-t pry on the pan. The gasket is integral with the windage tray, and doesn-t come out with the pan.
   
   
   
   NOTE

   The double ended studs must be installed in their original locations.
   
   
   
   
   
   
   
   
   Pan bolts and studs

   Pan

To install:

1. Install or connect the following:
   
   
   Oil pan gasket

   Oil pan. Tighten the bolts, in sequence, to 105 inch lbs. (12 Nm).

   Front crossmember

   Structural cover

   Negative battery cable
2. Fill the crankcase to the proper level with engine oil.
3. Start the engine and check for leaks. 
   
   
   
   Fig. Oil pan bolt torque sequence-3.7L engine
   
   
   
   
   Fig. Oil pan mounting bolt tightening sequence-4.7L engine
   
   
   
   

   Fig. Oil pan mounting bolt tightening sequence-5.7L engine

These details will help.

Thanks.           

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html